How to autoclave dental instruments?

How to autoclave dental instruments?
There are two steps, that should be followed as a preparation before sterilization procedure:

 Make sure, that you removed all the contaminants that have been left on the tools after the dental sterilizer procedure.
Dry the instruments, for this you may use paper towels and only now they are ready to be put into the autoclave chamber.

Please, note, that only following these steps can provide you an effective sterilization. If you don’t do these importing parts of preparation, the next step will not make any sense.

What is the best dental autoclave?

The experts proved: the most effective autoclaves for dental tools are based on steam.

Dry steam or wet steam machine  — depends on you. The wet steam autoclaves increase the duration of the process for a while. We can explain this by saying that the drying process is highly important in sterilizing and it makes possible to use the tools right after the sterilization is complete.
How to use a dental autoclave

There is nothing difficult in using autoclaves. Generally, this device is doing all the main job by itself. But for those who face autoclave for the first time, we should talk about general aspects of utilization.

The functioning of autoclave: step by step

Prepare the dental serilization equipment, using your device instructions or the information we wrote below.
Put the tools into the Dental Autoclave.
Close it until its process is running.
Wait until the equipment is sterile and dry.
Make sure there is no pressure in the chamber and remove the tools.
The instruments are ready to be re-used.

How does a dental air compressor work?

How often should dental autoclave be serviced